|
Two Post, Four Post, Four Post alignment lifts, as well as low level lifts. All imported from America.
 | Bend-Pak XPR-9F
• 9,000-pound lifting capacity
• Short column for low-ceiling installations
• Wide or narrow configuration
• Single-piece columns
• Single point safety release
• Drop-end arms provide a lower pad height
|
 | XPR-12C
• 12,000-pound lifting capacity
• Single piece columns
• Dual hydraulic ""Direct-Drive"" cylinders
• Electric/hydraulic power system
• Large, oversize, 3/4"" thick, A36 steel base plate
• Single-point safety-lock release
|
 | Bend-Pak HD-12B
• 5,4Ton lifting capacity
• Runways include rail-kit for optional accessories
• Electric/hydraulic power system
• Single hydraulic cylinder mounted underneath runway
• Internal “Anti-Sway’ slider blocks in each column
• Features heavy-duty ½” aircraft cable
• Oversized self-lubricating cable rollers
• Rugged 1-3/8” roller axles
• Multi-position safety locks in each column
• Ramps feature non-skid surface
• Push-button safety release
• Runways adjust for different tread widths
• Optional drive-thru ramps available
|
 | Bend-Pak LR-60
• Standard or portable models
• 3Ton lifting capacity
• Electric/hydraulic power system
• Hands-free safety system
• Rubber lifting blocks included
• Dropped cross bar for added clearance
• Heavy-duty steel channel frame
|
 | Bend-Pak BB-2 Pipe Bender
• Leg-operated control lever at front keeps hands free
• Two separate end finishing units at rear for all necessary flaring and expanding
• Degree plate located up front for easy viewing
• Comes complete with quick release bending and end finishing dies
• Includes high-speed clampless swager and internal expander
• 3-inch bending capacity: (dies optional)
• Compact design
• Energy efficient 5-H.P. motor
• Heavy-duty 4-GPM hydraulic pump
• Filtered hydraulic system
• Solid steel heat-treated tooling
• Limited 5-2-1 warranty. ( Five Years Structure / Frame / Two Years Components / One Year Tooling & Labor )
|
 | Bend-Pak MCL-HD16
Whether you need to lift a bus, fleet vehicle, or fire truck, BendPak’s MCL-16HD lift system is designed to meet your needs. This
super-duty mobile column lift system has a combined lifting capacity of 64,000-pounds and reaches a maximum lifting height of 70” in
just over one minute. Each lift column features a mechanical locking system, flow control check valve, pressure relief valve and
trouble-free hydraulics for increased safety and reliability. A unique hydraulic control system allows operators to lower the columns
manually in the event of a power supply failure. Microprocessor controls combined with a unique hydraulic synchronization system
ensures very smooth movement over the complete travel. A hydraulic pallet-truck mechanism combined with a tight turning radius
enables one person to move the columns effortlessly. The MCL-16HD systems controls are easy to use and feature up/down and
emergency stop buttons. |
 |
• 16,000-pound column capacity
• 64,000-pounds maximum system capacity
• Three separate modes of operation – single, pair or all-four
• 70” lifting height for tall mechanics
• Extended 15” forks accommodate super-wide tires and deep wheel configurations
• Multi-width wheel forks with locking pins accommodate the widest range of wheels eliminating the need for specialty wheel adapters
• Integrated electronic feature self diagnostics functions
• Independent column control stations eliminate the need for a single master control column
• Trouble-free hydraulic lifting system
• Low power consumption
• Separate key lock security for each control box
• Fuse protected
• Sealed rollers on the wheels for easy movement of the columns
• Sealed roller bearings on carriages for a lifetime of trouble free service
• Space saving design and reduced column weight
• A tight turning radius provides easy mobility
• Automatic synchronization and communication between columns for precise, level lifting
• Multiple automatic independent safety locks ensure high level of safety
• Quick-disconnect plugs at each column for fast and efficient set-up
• Simple operation, long service life and minimum maintenance
• Operator monitoring and automatic leveling control
• Set the vehicle on jack stands and use the columns to raise another vehicle in an adjoining bay.
• Low profile fork angle for easy positioning of columns, especially for floatation tires.
• Low mounted weight distribution of power unit and controls means a low center of gravity. This allows the columns to move easier than
“top heavy” screw-drive columns that have motors and drive gears positioned at the top of the columns.
• Durable powder-coat finish. |
 | BendPak Air Compressor, 7 HP 3Phase Motor
Choosing a BendPak TRI-MAX™ air compressor for your air system needs means youll get leading-edge technology from a
world leader in automotive service equipment. BendPak TRI-MAX™ Series compressors have earned their reputation as an
industry leader by meeting rigorous demands placed on them every day in businesses like automotive and body repair to
manufacturing and industrial service. This ASME certified power-house air compressor features the renowned TRI-MAX™
extreme-duty three-cylinder pump that has been designed and manufactured to operate with maximum efficiency under all
load conditions. The 100% cast-iron TRI-MAX™ Series pump features simple splash lubrication for total reliability and a ""W-3""
finned cylinder configuration that provides 360° cooling. A large pump that puts out a lot of air with little noise is due to the
slower RPM speed and two-stage design, a special feature of every TRI-MAX™ Series pump. Because they operate at slower
speeds than other compressors and feature large-diameter finned copper tubing between stages, they have a lower operating
temperature, which ultimately achieves maximum compressor efficiency with less moisture contamination. |
|
|