|
IM 2 Post Lifts, 4 Post Lifts, Auxillary Jacks and various Tyre Servicing Equipment
 | IM-LR30
Specifications:
Lifting Capacity: 2500kg
Max Lifting Height: 565mm
Min Height:95mm
Power Supply:380V
220v or 380v
Available in red and blue
|
 | IM-SLA - Scissor Alignment Lift
- Robust construction and super-balanced lifts for wheel alignment
- Flush mounted or surface mounted if access ramps equipped
- Electro-hydraulic jack
- Leveling controlled hydraulically
- Mechanical safety lock with air operated engagement and release
- Manual emergency lowering
- Adjustable position of turntable and longer sliding plate
- Adjustable jack frame
- Limit switch for maximum lifting height
- High quality hydraulic, pneumatic and electric components
|
 | IM-TC Range - Tyre Changer
Super-automatic tyre changer suitable for car and motorcycle wheels
Super-automatic tyre changer suitable for car and motorcycle wheels having rim size from 10” to 24” rim (max. diameter 1000 mm./39”, max. wheel width 380 mm./15”). Optional with turntable double speed bidirectional rotation system with hand switch control. |
 | IM-TCSWA - Tyre Changer
Semiautomatic tyre changer with horizontal moving arm, suitable for car and motorcycle wheels having rim size from 10"" to 20"" (max. diameter 1000mm/39"", max. wheel width 330 mm/13""). |
 | IM-WBSA - Wheel balancer
- Automatic measure of wheel distance and diameter(*)
- Automatic positioning where to apply the weights
- Automatic and pedal-operated brake
- Automatic start/stop when the hood is lowered/raised.
- Automatic application of adhesive weights on unbalanced positions(*)
- STOP pushbutton to stop the machine immediately
- Static and dynamic balancing modes
- Special balancing modes ALU, ALU
- Split function (or Hidden Weight) to hide the weights behind the spokes of rims(*)
-
Rapid optimization (OPT)
- Self-diagnosis
- Self-calibration
- Exceptional stability in reading the unbalance between planes
- Display in grams or ounces, in mm or inch
- No anchor-down installation needed
|
 | IM-2PA - 2 Post Lift – Clear Floor
- Electro-hydraulic driven lift with chain lifting system
-
Synchronization of cylinders independent from load distribution with mechanical leveling system
- Mechanical safeties with automatic engagement
- Two kinds of safety release (manual/automatic) for customer’s option
- Two kinds of lowering operation (manual/automatic) for customer’s option
- Overload valves
- Lowering speed control
- Manual emergency pump
- Anti-crushing protections
- Crash-proof upper cross beam
|
 | IM-TC26 - Truck tyre changer
Universal tyre changer suitable for any truck and heavy duty wheel with 13""-27"" rim (max. diameter 1600 mm./63"", max. wheel width 780mm./30,5""). Equipped with two-speed chuck and movable control unit.
Features
Two speed hydraulic chuck, with 5 different rim locking positions
Mobile cable control unit
Mobile control unit
Hand movable tool holder. |
 | IM-WBTR - Truck wheel balancer
Partnered with the IM-TC26 you would have a complete truck tyre changing solution at an affordable price. The IM-WBTR has a 200kg lift to aid the operator in mounting and demounting heavy wheels.
Specifications:
Max Wheel Diameter: 1280mm
Rim Width: 3-20 inches
Rim Diameter: 10-24 inches
Max Wheel Weight: 200kg
Imbalance Resolution: 1g or 5g |
 | IM-4P - 4 Post lift
The IM-4P is a new addition to the IM range of lifting equipment and has the specifications to cover a large variety of uses.
Specifications
Max Wheel Base: 180 3/8`` (4580mm)
Rise: 72 7/8`` (1850mm)
Length Overall: 237 3/`` (6029mm)
Width Overall: 131`` (3327mm)
Inside Of Columns: 2980mm
Between Columns: 181 1/2`` (4610mm)
Height of Columns: 82 1/16`` (2084mm)
Height of Runways: 7 1/16`` (180mm)
Width Between Runways: 0`` - 48 13/16`` (0-1240mm)
Length Of Runways: 198`` (5030mm)
Lifting Capacity: 12000lbs (5443kg)
Air Supply Required: 85-115PSi
Motor: 2HP
Voltage (single phase): 220V
Net Weight A (box): 1024kg
Net Weight B (frame): 28kg
Package Size A (box): 5110 x 600 x 670mm
Package Size B (frame): 915 x 285 x 300mm
|
 | IM-Rolling Jack
The Rolling Bridge Jack has been added to the IM range to cater for alignment lifts and pit jacks that can not use auxillary jacks. It can be operated with compressed air or a simple hand pump. |
 | IM-ML One End Lifter
The IM-ML One End Lifter is a moveable mini lifter. It is perfect for Panelbeaters to inspect the underside of damaged cars but has various other uses. This lift is operated by a spindle system nad has no fixed operating position as all you need is a car to lift and a 220V plug socket. It also comes with a wheel support and a sil support so you can lift the car by either the wheel or the sil.
Technical Data:
Lifting Capacity: 3000kg
Max Lifting Height: 1000mm
Lifting Time: 35sec |
 | IM-2PBP - 2 Post Lift – Base Plate
- Electro-hydraulic driven lift with chain lifting system
-
Synchronization of cylinders independent from load distribution with mechanical leveling system
- Mechanical safeties with automatic engagement
-
Two kinds of safety release (manual/automatic) for customer’s option
- Two kinds of lowering operation (manual/automatic) for customer’s option
- Overload valves
- Lowering speed control
- Manual emergency pump
- Anti-crushing protections
- Three adaptor extensions (50mm, 75mm, 150mm)
|
 | IM-TC56 - OTR Tyre Changer
Universal tyre changer suitable for any truck and heavy duty wheel with 14”-56” rim (max. diameter 2300 mm./90,5”, max. wheel width 1065 mm./42”). Equipped with two-speed chuck.
Features
Two speed hydraulic chuck, with 5 different rim locking points
Movable control unit
Hand movable tool holder
|
 | MRL 27
Electrical Requirements: 380Volt, 50Hz - 2HP / single phase - 3prong power plug.
Maximum Lifting Capacity: 2722kg
Maximum Lifting Height: 1220mm
Overall Dimensions: 253L x 100W x 178H
Piston Rod Travel: 520mm
Pump Type: Hydraulic / Electo w/Steel dolly
Pump Hydraulic Oil Capacity: 605 Quarts
Weight: 385kg |
 | Tyre Changer Single Arm
Description of the machine
Speed change switch
Clamps
Mounting head
Airline gauge
Mounting bar
Horizontal arm
Air supply
Bead breaker
Wheel support
Bead lifting lever
Bead breaker control pedal
Clamp control pedal
Reverser control pedal
Tilting arm pedal
Turntable
Locking button
Standard features
- External locking rim dimensions : 10"" - 20"", 11"" - 21"", 12"" - 22""
- Internal locking rim dimensions : 12"" - 22"", 13"" - 23"", 14"" - 24""
- Max tyre diameter : 1000 mm (39"")
- Max tyre width : 390mm (15"")
- Force on bead breaker blade (10 bar) : 3100 kg
- Working Pressure : 10 bar (145 psi)
- Inflating pressure : 3,5 bar (50 psi)
- Power supply voltage : 230/400v , 3ph
- Motor power : 0,8/1,1 kw
- Rotating speed : 7 - 14 rpm
- Max spindle torque : 1200 NM
- Dimensions : 1280 x 1750 x 1970
- Net weight : 244 kg STND, 264 kg GT
- Noise level in working conditions : <70 db(A)
|
 | Tyre Changer with Helper Arm
Description of the machine
Speed change switch
Clamps
Mounting head
Airline gauge
Mounting bar
Horizontal arm
Air supply
Bead breaker
Wheel support
Bead lifting lever
Bead breaker control pedal
Clamp control pedal
Reverser control pedal
Tilting arm pedal
Turntable
Locking button
Standard features
- External locking rim dimensions : 10"" - 20"", 11"" - 21"", 12"" - 22""
- Internal locking rim dimensions : 12"" - 22"", 13"" - 23"", 14"" - 24""
- Max tyre diameter : 1000 mm (39"")
- Max tyre width : 390mm (15"")
- Force on bead breaker blade (10 bar) : 3100 kg
- Working Pressure : 10 bar (145 psi)
- Inflating pressure : 3,5 bar (50 psi)
- Power supply voltage : 230/400v , 3ph
- Motor power : 0,8/1,1 kw
- Rotating speed : 7 - 14 rpm
- Max spindle torque : 1200 NM
- Dimensions : 1280 x 1750 x 1970
- Net weight : 244 kg STND, 264 kg GT
- Noise level in working conditions : <70 db(A)
|
 | Wheel Balancer with information screen
TECHNICAL DATA
Power supply 230V/50Hz-1Ph / 0.25kW
Run Diameter 10""-24""
Max Wheel Diameter 960mm
Wheel Width 3""-12""
Balancing precision ± 1g
Centring wheel diameter hole 40-150mm
Max Wheel Weight 65kg
Speed Rotation ~ 180rpm
Net Weight 160kg
Accessories included 3 centring cones, 1 LT spacer calliper weight pliers
Professional Video Display Wheel Balancer. Software & Design Made in Italy
- 2D System, automatic input for distance and diameter
- 3D System, automatic input for distance, diameter and width {with optional external data set arm rcf. 888.967)
- Geometric System, measurement and weight position calculations inside the wheel
- Static and dynamic program
- 6 Alu Program, specific for all weight allocation and combination
- SPOKE program, split and hide weight back to spokes
- OPT program, tyre-rim optimization
- FPP system, wheel braking to the compensate weight positionPedal brake to hold main shaft during weight application and wheel mounting
- User Spec Memory, to store wheel size
- ECM, easy calibration mode, Areo patented
- Multilanguage set up
- Customize functions, weight units, dimension units, and graphic display
- 19 weight tray. 3 cent ring cones holder
- 3 cones from 40mm to 150mm
- I light truck spacer
- I quick nut
|
|
|